Description
Sennheiser EW-DX 30-Channel Wireless Receiver Rack – Hire
This is a professional 30-channel radio mic receiver rack built on Sennheiser’s EW-DX digital wireless platform. It is designed for musicals, theatre seasons, conferences and live events that need a lot of reliable channels from one rack. Everything is pre-wired, frequency-coordinated and networked in a castored road case, so on-site setup is just power, antennas and audio.
Built for theatre and live production
The rack holds 15 Sennheiser EW-DX EM 2 dual-channel receivers, giving 30 channels of digital wireless in the S1-10 band (606–694 MHz), which is legal for use in Australia. RF is handled by four cascaded EW-D ASA active antenna splitters fed from two Sennheiser ADP UHF paddle antennas, so all 30 channels run from a single antenna pair.
Full WSM control and monitoring
Every receiver is networked through an onboard Cisco SG300-28P managed PoE switch and controlled with Sennheiser Wireless Systems Manager (WSM). From one laptop your audio team can:
- Monitor RF levels, audio levels and transmitter battery status for all 30 channels
- Scan, plan and deploy frequencies
- Rename channels, adjust gain and manage settings remotely
Why Sennheiser EW-DX?
- Digital audio: clear, transparent sound with very low latency, ideal for vocals and theatre.
- High channel density: stable performance in busy RF environments.
- Secure transmission: AES-256 encryption is available.
- Industry standard: familiar to audio techs and compatible with EW-DX bodypacks and handhelds.
What’s included
- 15 × Sennheiser EW-DX EM 2 S1-10 dual-channel receivers
- 4 × Sennheiser EW-D ASA 4-way active antenna splitters
- 2 × Sennheiser ADP UHF (470–1075 MHz) paddle antennas
- 2 × 10 m BNC–BNC RF cables
- 2 × 50 Ω BNC panel-mount passthrough cables
- 1 × Cisco SG300-28P managed PoE Ethernet switch
- 4 × PoE to 12 V DC adapters
- 19 × CAT5e patch cables (pre-patched)
- 1 × 24-channel 5 m audio multicore
- 1 × piggyback IEC power cable
- 1 × 2RU rack drawer for accessories and cables
- Rack-mount road case on castors
Transmitters (bodypacks, handhelds) and headset microphones are not included. Add them to your quote separately.
Perfect for
- Musical theatre and community theatre productions
- School musicals and performing arts events
- Conferences, panels and corporate events
- Touring shows and festivals
Delivery, setup and support
ISLX is based in Bendigo and services Melbourne and regional Victoria. We can deliver, install and coordinate frequencies on site, and an experienced audio technician can be booked to run the system for your season.
Frequently asked questions
Do I need a licence to use this system?
The S1-10 range (606–694 MHz) falls within the band covered by the ACMA class licence for wireless microphones in Australia, so no individual licence is required for typical use.
Are bodypacks and headset mics included?
No. The rack is receivers and infrastructure only. Ask us for a package with EW-DX transmitters and headset or lapel microphones.
Can it be controlled remotely?
Yes. All receivers are networked and controlled from a laptop using Sennheiser Wireless Systems Manager (WSM).
How long does setup take?
The rack is pre-wired and pre-patched, so you just connect power, antennas and the multicore, then load your frequency plan.
Check availability and add this rack to your quote, or contact ISLX to build a full theatre audio package with transmitters, headsets, mixing and an operator.


Reviews
There are no reviews yet.